28" 700mm Evaporative air water cooler industrial fan blower

Introduction

Application

PRODUCT DESCRIPTION

CaOiOrL has 5 models. AWC160400,AWC280700,AWC360900,AWC421000,AWC481200. ur CaOiOrL portable evaporative cooler is meant to be used in an open – air environment, such as a garage , sunroom or barn-you must provide adequate ambient airflow to ensure your evaporative cooler works at its highest efficiency . When using in a semi-closed environment, be sure to leave a door or window open to allow for the proper amount of airflow. . 

Compact and Weight

Multiple Functions:

Operation Panel:

Stackable for easy storage:

High quality wet curtain

Details

QUICK SETUP

For setup , evaporative media should appear wet before starting the fan .Check the low water in indicator on the control panel to monitor water level in tank . The water adjustment valve on each portable evaporative cooler is set at max flow. However, ensure the knob is turned completely the right before use. Turn to the left to increase water flow. If entrainment occurs – water is spitting from the front of the product – use the value to decrease the water flow until entrainment ceases.

OPERATION WARNINGS

1. Not for use by children

2. Not for use by persons with reduced physicalsensory or mental   capabilities

Not for use by persons who have not reviewed the owner's manual and   familiarized themselves with the operation of the product

SAFE OPERATION

·Do not operate any evaporative cooler with a damaged cord or plug

·Do not run power cord under carpeting orcover with throwrugs,runners or   similar coverings.Arrange power cordaway from traffic areas to avoid tripping   hazards.

·Read the evaporative cooler's instructions,owner's manual and labels   throughly before use.

·Always unplug the power cord to the evaporative cooler before performing   inspections or repairs.

·Always unplug the evaporative cooler during filling and cleaning.

·Do not step on or roll over power cord with heavy or sharp objects.

·Do not operate evaporative cooler unless all cool?

evaporative media is securely in place.

·Test the GFCI receptacle or breaker monthly to ensure it is functioning   properly.

·Remove the plug from the electrical receptacle by pulling on the plug,not   the power cord.

·Operation near open flames or sparks is not recommended.

·If operating near open flame or sparks,ensure the pump is continuously   running in order to saturate and wet cool evaporative media.

·When cleaning your evaporative cooler,ensure water does not get into the   motor or electrical system to prevent damage.

·The use of extension cords with your evaporative cooler is not recommended .   However , if the owner determines that his or her circumstance or intended use   requires the use of an extension cord,the following requirements must be   met:

-Use properly grounded 14 AWG or greater for AWC360900 and AWC421100

-Use properly grounded 12 AWG or greater for AWC481200

-Extension cord must not exceed 50 feet(15.24 meters)in length;and

-Extension cord must be properly grounded

·Evaporative coolers should not be modified in any way (other than repairs   made by CaOiOrL replacement parts).

• Prev archive
• Next archive